D-Link DIR-612 User Manual

57D-Link DIR-612 User Manual
Section 5 - Connecting to a Wireless Network
Using Windows Vista
®
Windows Vista
®
users may use the built-in wireless utility. If you are using another company’s utility or Windows
®
2000, please
refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site
survey” option similar to the Windows Vista
®
utility as seen below.
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select Connect to a network.
If you receive the Wireless Networks Detected bubble, click on the
center of the bubble to access the utility.
or
The utility will display any available wireless networks in your area.
Click on a network (displayed using the SSID) and click the Connect
button.
If you get a good signal but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.

D-Link DIR-612 Specifications

Wireless Signal Rates

IEEE 802.11n maximum signal rate	300 Mbps
IEEE 802.11g signal rates	54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 11 Mbps, 9 Mbps, 6 Mbps

Wireless Frequency Range

Wireless frequency range (Europe)	2.4 GHz to 2.4835 GHz

Operating Environment

Operating temperature	0 °C to 40 °C (32 °F to 104 °F)
Storage temperature	-20 °C to 65 °C (-4 °F to 149 °F)
Humidity range	10% to 95% (non-condensing)

Weight and Dimensions

Dimensions	175 x 150 x 31 mm (6.89 x 5.9 x 1.22 inches)