DSL-2520U Quick Installation Guide
Changing Administrator Password
It is highly recommended to change the administrator password upon initial
configuration. This helps you to improve your network security.
1. Go to the System / Administrator password page.
2. Enter a new password for the administrator account in the Password
and Confirmation fields.
3. Click the Save button.
!
Remember or write down the new password for the administrator
account. In case of losing the new password, you can access the settings
of the router only after restoring the factory default settings via the
hardware RESET button. This procedure wipes out all settings that you
have configured for your router.
Saving Settings to Non-volatile Memory
In order to avoid losing the new settings upon hardware reboot (accidental or
intentional power-off of the device), it is recommended to save the settings to
the non-volatile memory of the router.
Click the Save&Reboot line in the top-page menu displayed when the mouse
pointer is over the System caption.
Wait until the router is rebooted. Now you can use it to access the Internet or
access the web-based interface of the router to configure additional
parameters. For detailed description of every page of the web-based interface,
see the “User Manual” document (ftp.dlink.ru/pub/ADSL/DSL-
2520U/Description/).
14
To Next Page
Loading...
Need help?
Data Transfer Rates
