EasyManuals Logo
Home>D-Link>Network Router>DSL-2520U

D-Link DSL-2520U Quick Installation Guide

D-Link DSL-2520U
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
DSL-2520U Quick Installation Guide
CONNECTING TO PC
PC with Ethernet Adapter
1. Make sure that your PC is powered off.
2. Connect an Ethernet cable between the Ethernet port located on the back
panel of the router and the Ethernet port of your PC.
3. Connect a phone cable between the DSL port of the router and the ADSL
OUT port of the splitter. Connect your phone to the PHONE port of the
splitter. Then connect another phone cable between a phone jack and the
ADSL IN port of the splitter.
4. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
5. Turn on the router by pressing the ON/OFF button on its back panel.
6. Turn on your PC and wait until your operating system is completely
loaded.
3

Other manuals for D-Link DSL-2520U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DSL-2520U and is the answer not in the manual?

D-Link DSL-2520U Specifications

Data Transfer Rates IconData Transfer Rates
ADSL full rate downstreamup to 8 Mbps
ADSL full rate upstreamup to 1 Mbps
G.lite downstreamup to 1.5 Mbps
G.lite upstreamup to 512 Kbps
G.dmt.bis full rate downstreamup to 12 Mbps
G.dmt.bis full rate upstreamup to 12 Mbps
ADSL2 full rate downstreamup to 24 Mbps
Interfaces IconInterfaces
ADSL interface connectorRJ-11
LAN interfaceRJ-45 port for 10/100BASE-T Ethernet
USB interfaceUSB port Type B connector, USB 1.1 Specification

Related product manuals