D-Link DSL-2740B User Manual

Section 3 - Configuration
D-Link DSL-2740B User Manual
52
ADVANCED
This chapter include the more advanced features used for network management and security as well as administrative tools to manage the router,
view status and other information used to examine performance and for troubleshooting.
ADVANCED WIRELESS
These options are for users that wish to change the behavior of their 802.11g wireless radio from the standard setting. D-Link does not recommend
changing these settings from the factory default. Incorrect settings may impair the performance of your wireless radio. The default settings should
provide the best wireless radio performance in most environments.
To access the ADVANCE WIRELESS setting window, click on the Advanced Wireless button in the ADVANCED directory.
ADVANCED SETTINGS
Allows you to configure advanced features of the wireless LAN interface
MAC FILTER
Allows you to configure wireless firewall by denying or allowing designated
MAC addresses.
BRIDGE
Allows you to configure wireless bridge (also known as Wireless Distribution
System) features of the wireless LAN interface.
QOS (QUALITY OF SERVICE)
Allows you to configure wireless QoS.

D-Link DSL-2740B Specifications

ADSL Standards

downstream data rate	up to 8 Mbps
upstream data rate	up to 1 Mbps
G.lite downstream data rate	up to 1.5 Mbps
G.lite upstream data rate	up to 512 Kbps
G.dmt.bis downstream data rate	up to 12 Mbps
G.dmt.bis upstream data rate	up to 12 Mbps

ADSL2 Standards

full rate downstream data rate	up to 24 Mbps
full rate upstream data rate	up to 1 Mbps

Wireless LAN

wireless speed	up to 300 Mbps
frequency range	2.4 GHz to 2.484 GHz
antennas	2 non-detachable dipole