D-Link DSL-2740B User Manual

Section 3 - Configuration
D-Link DSL-2740B User Manual
92
DIAGNOSTICS
This page shows the result of your router’s self diagnostic and connection test results. The Internet connectivity status will only show PASS if you
have correctly configured your Internet connection and your router is currently online.
To access the DIAGNOSTICS setting window, click on the Diagnostics button under the MAINTENANCE tab.
INTERNET CONNECTIVITY CHECK
Click on the Test button to run the diagnostics again.
Notice: The Diagnostic Test window is used to test connectivity of
the Router. A Ping test may be done through the local or external
interface to test connectivity to known IP addresses. The
diagnostics feature executes a series of test on your system
software and hardware connections. Use this window when
working with your ISP to troubleshoot problems.

D-Link DSL-2740B Specifications

ADSL Standards

downstream data rate	up to 8 Mbps
upstream data rate	up to 1 Mbps
G.lite downstream data rate	up to 1.5 Mbps
G.lite upstream data rate	up to 512 Kbps
G.dmt.bis downstream data rate	up to 12 Mbps
G.dmt.bis upstream data rate	up to 12 Mbps

ADSL2 Standards

full rate downstream data rate	up to 24 Mbps
full rate upstream data rate	up to 1 Mbps

Wireless LAN

wireless speed	up to 300 Mbps
frequency range	2.4 GHz to 2.484 GHz
antennas	2 non-detachable dipole