D-Link DSL-2740B User Manual

Section 3 - Configuration
D-Link DSL-2740B User Manual
84
Wi-Fi Protected Setup
Wi-Fi Protected Setup is a standard for easy and secure establishment of a wireless home network.
To access the WI-FI Protected Setup Configuration window, click on the WI-FI Protected Setup button under the ADVANCED tab.
WI-FI Protected Setup
Check the Enable checkbox to activate Wi-Fi
Protected Setup service.
Check Lock Wireless Settings checkbox to let
user keep their wireless settings like SSID, Security
Mode and key.
Current PIN textbox shows the PIN code used
currently. User can use a new PIN code by clicking
Generate New PIN button.
Click Add Wireless Device with WPS button will
bring you to the WPS wizard. Please refer to page
38.
Click the Apply button to save and apply your
settings.

D-Link DSL-2740B Specifications

ADSL Standards

downstream data rate	up to 8 Mbps
upstream data rate	up to 1 Mbps
G.lite downstream data rate	up to 1.5 Mbps
G.lite upstream data rate	up to 512 Kbps
G.dmt.bis downstream data rate	up to 12 Mbps
G.dmt.bis upstream data rate	up to 12 Mbps

ADSL2 Standards

full rate downstream data rate	up to 24 Mbps
full rate upstream data rate	up to 1 Mbps

Wireless LAN

wireless speed	up to 300 Mbps
frequency range	2.4 GHz to 2.484 GHz
antennas	2 non-detachable dipole