D-Link DWA-110 User Manual

22D-Link DWA-110 User Manual
Section 3 - Configuration
Windows
®
XP Configuration Utility
Windows
®
XP/ Vista users may use the built-in wireless utility. The following instructions are for Service Pack 2 users.
If you are using Windows
®
2000, you must use the D-Link utility. Please refer to page 15.
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select View Available Wireless
Networks.
If you receive the Wireless Networks Detected bubble, click on the
center of the bubble to access the utility.
The utility will display any available wireless networks in your area. Click
on a network and click the Connect button.
Refer to the Wireless Security section for information on connecting
to a secure network.
If you want to use the D-Link utility instead of the Windows
®
XP wireless
utility, refer to the next page.

D-Link DWA-110 Specifications

General

Wi-Fi	Yes
Modulation	DBPSK
Wi-Fi band	Single-band (2.4 GHz)
Security algorithms	64-bit WEP, 128-bit WEP, WPA, WPA2-PSK
Maximum data transfer rate	54 Mbit/s
Connectivity technology	Wireless
Output voltage	5 V
RX power consumption	280 mA
Dimensions (WxDxH)	87 x 28 x 12 mm
Compliance industry standards	IEEE 802.11g/b
Compatible operating systems	Windows 98SE, ME, XP SP2, 2000 SP4, Vista
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Certification	FCC Class B, CE, C-Tick, IC, Wi-Fi, WPS