D-Link DWA-121 User Manual

43D-Link DWA-121 User Manual
Section 4 - Wireless Security
Congure WPA/WPA2 (RADIUS)
Using the D-Link Wireless Connection Manager
WPA and WPA2 are for advanced users who are familiar with using a RADIUS server and setting up certicates.
1. Open the Wireless Connection Manager by double-clicking on the D-Link icon on your
desktop. Click on New to create a new prole or highlight an existing prole and click
Modify.
2. Select WPA/WPA2-Enterprise under Set Security Option and then select TKIP or AES.
3. Click on Advanced Cong to continue.
4. Next to EAP Type, select EAP-TLS or PEAP. Extensible Authentication Protocols allow
devices on the network to request authentication from the RADIUS server in the network.
All the devices on the network must use the same EAP type when using a RADIUS server
for authentication. Some RADIUS servers require that the Validate Server eld be selected.
Check this eld if your RADIUS server requires validation.
5. Select an User Certicate from the drop-down menu.
6. Enter the login information required to authenticate.
7. Click Add to enter the IP address(es) of your RADIUS servers.
8. Click OK to save your settings.

D-Link DWA-121 Specifications

Power

operating voltage	5 VDC +/- 5%
power consumption (transmit mode)	230 mA
power consumption (receive mode)	120 mA

Operating Environment

operating temperature	0 to 40 ºC (32 to 104 ˚F)
operating humidity	10% to 90% maximum (non-condensing)
frequency range	2.4GHz to 2.483GHz (North America)

Weight and Dimensions

dimensions	0.7” x .06” x 0.2”
weight	2.2 g