D-Link DWA-510 User Manual

18D-Link DWA-510 User Manual
Section 3 - Configuration
Configuration
This section will show you how to configure your new D-Link wireless adapter using the D-Link Utility as well as the Windows
®
XP
Zero Configuration Utility and Vista WLAN Auto Configuration.
D-Link Configuration Utility
The D-Link DWA-510 uses the Configuration Utility as the management software. The utility provides the user an
easy interface to change any settings related to the wireless adapter. After you have completed the installation of the
DWA-510andwheneveryoustartthecomputer,theCongurationUtilitystartsautomaticallyandthesystemtrayiconisloadedin
the toolbar. Clicking on the utility icon will start the Configuration Utility.
If you are using Windows Vista please skip to page 26 or Windows XP skip to page 27.

D-Link DWA-510 Specifications

General

Modulation	DBPSK
Security algorithms	64-bit WEP, 128-bit WEP, WPA, WPA2-PSK
Maximum data transfer rate	54 Mbit/s
Connectivity technology	Wireless
RX power consumption	260 mA
Gain	2 dBi
Link/Act LED	Yes
Dimensions (WxDxH)	126 x 12 x 19 mm
Compliance industry standards	IEEE 802.11g/b
Compatible operating systems	Windows 98SE, ME, 2000, XP, Vista
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Certification	FCC Class B, CE, C-Tick, IC, Wi-Fi, WPS