D-Link DWA-510 User Manual

42D-Link DWA-510 User Manual
Section 4 - Wireless Security
Configure WPA/WPA2 Passphrase
Using the Windows
®
XP Utility
It is recommended to enable WPA-PSK on your wireless router or access point before configuring your wireless adapter. If you are
joininganexistingnetwork,youwillneedtoknowthepassphrasebeingused.
2. Highlight the wireless network (SSID) you would like to
connect to and click Connect.
1. Open the Windows
®
XP Wireless Utility by right-clicking
on the wireless computer icon in your system tray
(lower-rightcornerofscreen).SelectView Available Wireless
Networks.

D-Link DWA-510 Specifications

General

Modulation	DBPSK
Security algorithms	64-bit WEP, 128-bit WEP, WPA, WPA2-PSK
Maximum data transfer rate	54 Mbit/s
Connectivity technology	Wireless
RX power consumption	260 mA
Gain	2 dBi
Link/Act LED	Yes
Dimensions (WxDxH)	126 x 12 x 19 mm
Compliance industry standards	IEEE 802.11g/b
Compatible operating systems	Windows 98SE, ME, 2000, XP, Vista
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Certification	FCC Class B, CE, C-Tick, IC, Wi-Fi, WPS