D-Link DWA-642 User Manual

27D-Link DWA-642 User Manual
Section 3 - Configuration
Connect to a Wireless Network
Using Windows Vista
®
Windows Vista
®
users may use the built-in wireless utility. If you are using another company’s utility or Windows
®
2000,
please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities
will have a “site survey” option similar to the Windows Vista
®
utility as seen below.
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select Connect to a
network.
If you receive the Wireless Networks Detected bubble, click
on the center of the bubble to access the utility.
or
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) and click
the Connect button.
If you get a good signal but cannot access the Internet, check the
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.

D-Link DWA-642 Specifications

General

Brand	D-Link
Model	DWA-642
Category	Adapter
Language	English