D-Link DWA-642 User Manual

38D-Link DWA-642 User Manual
Section 4 - Wireless Security
Configure 802.1x (RADIUS)
Using the D-Link Utility
802.1x is for advanced users who are familiar with using a RADIUS server and setting up certificates.
1.
Open the Wireless Utility by double-clicking on the D-Link icon in your
system tray (lower-right corner of screen). Click on New to create a new
profile or highlight an existing profile and click Modify.
2. Select 802.1x under Set Security Option.
3. Click on Advanced Config to continue.
4. Next to EAP Type, select EAP-TLS, LEAP, EAP-TTLS, or PEAP.
Extensible Authentication Protocols allow devices on the network to
request authentication from the RADIUS server in the network. All the
devices on the network must use the same EAP type when using a
RADIUS server for authentication. Some RADIUS servers require that
the Validate Server field be selected. Check this field if your RADIUS
server requires validation.
5. Select an
User Certificate from the drop-down menu.
6. Enter the login information required to authenticate.
7. Click
Add to enter the IP address(es) of your RADIUS servers.
8. Click
OK to save your settings.

D-Link DWA-642 Specifications

General

Brand	D-Link
Model	DWA-642
Category	Adapter
Language	English