D-Link EXO AX COVR-X1870 User Manual

143D-Link COVR-X1870 User Manual
Appendix C - Networking Basics
Networking Basics
Check your IP address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP
server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click
OK. (Windows® 7/Vista® users type cmd in the Start
Search box.)
At the prompt, type ipcong and press Enter.
This will display the IP address, subnet mask, and the
default gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation,
security settings, and the settings on your router. Some
rewall software programs may block a DHCP request on
newly installed adapters.

D-Link EXO AX COVR-X1870 Specifications

General

Brand	D-Link
Model	EXO AX COVR-X1870
Category	Network Router
Language	English