xStack® DES-3200 Series Layer 2 Ethernet Managed Switch Hardware Installation Guide
18
Chapter 2 Installation
Package Contents
Before You Connect to the Network
Installing the Switch without the Rack
Installing the Switch in a Rack
Mounting the Switch in a Standard 19" Rack
Power on AC Power
Connecting DC Power
Package Contents
Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following
items:
One Stand-alone DES-3200 Series Switch
One AC power cord
Rack mounting kit (two brackets and screws)
Four rubber feet with adhesive backing
RJ-45 console cable
Quick Installation Guide
This manual on CD, including a D-View trial version
If any item is missing or damaged, please contact your local D-Link Reseller for replacement.
Before You Connect to the Network
The site where you install the Switch may greatly affect its performance. Please follow these guidelines for setting up
the Switch.
Install the Switch on a sturdy, level surface that can support at least 7kg (15.43lbs) of weight. Do not place
heavy objects on the Switch.
The power outlet should be within 1.82 meters (6 feet) of the Switch.
Visually inspect the power cord and see that it is fully secured to the AC power port.
Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Leave at
least 10 cm (4 inches) of space at the front and rear of the Switch for ventilation.
Install the Switch in a fairly cool and dry place for the acceptable temperature and humidity operating ranges.
Install the Switch in a site free from strong electromagnetic field generators (such as motors), vibration, dust,
and direct exposure to sunlight.
When installing the Switch on a level surface, attach the rubber feet to the bottom of the device. The rubber
feet cushion the Switch, protect the casing from scratches and prevent it from scratching other surfaces.
To Next Page
Loading...
Need help?
General
