D-Link xStack DES-3200 Series Installation Guide

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch Hardware Installation Guide
1
Chapter 1 Introduction
Switch Description
Front Panel Description
Rear Panel Description
Side Panel Description
Gigabit Combo Ports
Switch Description
The DES-3200 Series Hardware Installation Guide describes the hardware installation and specifications
concerning the DES-3200 Series switches. These switches are identical in configuration and very similar in basic
hardware and consequentially, most of the information in this manual will be universal to the total group of switches.
This manual concentrates on the Hardware Version C1.
The DES-3200 Series switches are equipped with Copper ports (10/100Mbps) and SFP ports (100/1000Mbps) that
can be used to attach various networking devices to the network like Computers, Notebooks, Print Servers, Network
Attached Storage devices, IP Cameras, VoIP PBX devices, and other Switches. The Small Form Factor Portable (SFP)
combo ports can be used together with fiber-optical transceivers in order to connect various other networking devices,
using a fiber-optic connection, to the network at Gigabit Ethernet speeds over great distances.
The DES-3200 Series switches provide unsurpassed performance, fault tolerance, scalable flexibility, robust security,
standard-based interoperability and impressive technology to future-proof departmental and enterprise network
deployments with an easy migration path.
The Series features the following list of switches:
Switch Description
DES-3200-10
Eight 10/100Mbps Copper Ports, One 100/1000Mbps SFP Port, One Combo
10/100/1000Mbps Copper / 100/1000Mbps SFP Port, and One RJ-45 Console Port for
out-of-band CLI configuration.
DES-3200-10-DC
Eight 10/100Mbps Copper Ports, One 100/1000Mbps SFP Port, One Combo
10/100/1000Mbps Copper / 100/1000Mbps SFP Port, and One RJ-45 Console Port for
out-of-band CLI configuration.
DES-3200-18
Sixteen 10/100Mbps Copper Ports, One 100/1000Mbps SFP Port, One Combo
10/100/1000Mbps Copper / 100/1000Mbps SFP Port, and One RJ-45 Console Port for
out-of-band CLI configuration.
DES-3200-18-DC
Sixteen 10/100Mbps Copper Ports, One 100/1000Mbps SFP Port, One Combo
10/100/1000Mbps Copper / 100/1000Mbps SFP Port, and One RJ-45 Console Port for
out-of-band CLI configuration.
DES-3200-26
Twenty-four 10/100Mbps Copper Ports, Two Combo 10/100/1000Mbps Copper /
100/1000Mbps SFP Ports, and One RJ-45 Console Port for out-of-band CLI
configuration.
DES-3200-26-DC
Twenty-four 10/100Mbps Copper Ports, Two Combo 10/100/1000Mbps Copper /
100/1000Mbps SFP Ports, and One RJ-45 Console Port for out-of-band CLI
configuration.
DES-3200-28
Twenty-four 10/100Mbps Copper Ports, Two Combo 10/100/1000Mbps Copper /
100/1000Mbps SFP Ports, Two 100/1000Mbps SFP Ports, and One RJ-45 Console
Port for out-of-band CLI configuration.
DES-3200-28F
Twenty-four 100Mbps SFP Ports, Four Combo 10/100/1000Mbps Copper /
100/1000Mbps SFP Ports, and One RJ-45 Console Port for out-of-band CLI
configuration.
DES-3200-28P
Twenty-four 10/100Mbps Power over Ethernet Copper Ports, Two Combo

D-Link xStack DES-3200 Series Specifications

General

Brand	D-Link
Model	xStack DES-3200 Series
Category	Network Router
Language	English