DAELIM E-FIVE User Manual

If electrode is stained or clearance is not
right, satisfactory spark is not produced.
Clean and make adjustment.
① Loosen the special screw and remove
the plug maintenance cover.
② Remove the spark plug cap.
③ Clean around the plug.
④ Using a plug wrench, remove the plug.
⑤ Clean plug with plug cleaner.
⑥ Check electrode for wear and corro-
sion.
⑦
Check the plug gap using a feeler gauge.
PLUG GAP : 0.6~0.7mm
⑧Tighten with hands until the plug
washer touches cylinder head.
STANDARD PLUG: B8HSA
⑨ If new plug is installed, turn 1/2 and
tighten using a plug wrench.
If plug is reused, turn 1/3~1/4 and
tighten.
⑩ Install in the reverse order of removal.
40
SPARK PLUG
CAUTION
●If plug of different maker or different
heat value is used, it causes
unsatisfactory engine starting,
inadequate engine revolution and
output deterioration.
●The spark plug must be securely
tightened. An improperly tightened
plug can become very hot and
possibly damage the engine.
PLUG GAP
PLUG MAINTENANCE COVER
SPARK PLUG CAP
SPARK PLUG
SCREW
**E-5 OWNERS(1~47) 02.11.5 4:3 PM 페이지40

DAELIM E-FIVE Specifications

General

Brand	DAELIM
Model	E-FIVE
Category	Scooter
Language	English