EasyManuals Logo
Home>Daewoo>DVD VCR Combo>DF-4100P

Daewoo DF-4100P User Manual

Daewoo DF-4100P
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
28
Virtual Surround
You can enjoy a simulated 3D effect from two speakers by setting Virtual
Surround to On.
Follow the same procedure as ‘Digital Output‘ to set the ‘Virtual
Surround’ option.
Audio
Digital Output Off
Dynamic Range Off
Virtual Surround Off
Instructions
Enter-Confirm Setup-Exit Move …†
Select Virtual
Surround
Off
On
Follow the same procedure as ‘Video’ Settings to select ‘Audio’ Settings.
Digital Output
1
Use [/] to select ‘Digital Output‘ while the ‘Audio’ submenu is
displayed.
2
Press [ENTER] or [] to go to the second level.
3
Use [/] to select the desired digital output type.
4
Press [ENTER] to confirm your selection.
5
Press [SETUP] to exit the menu.
Off
No signal will be output from the Digital Audio Out jacks.
LPCM
Select when connected to a 2 channel digital stereo amplifier. The DVD
Recorder+VCR's digital audio signal will be output in the PCM 2ch format
when you play a DVD (or VHS tape) recorded with a Dolby Digital (only for DVD) or MPEG soundtrack. If the DVD
is recorded with a DTS sound track then no sound will be heard.
Bitstream
Select when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a Dolby
Digital or DTS decoder).
Initial Setup
Audio
Digital Output Off
Dynamic Range Off
Virtual Surround Off
Instructions
Enter-Confirm Setup-Exit Move …†
Select Digital
Output
Off
Bitstream
LPCM
PREFERENCES / Audio Settings
Preferences
Video
Audio
Parental Controls
Auto Settings
VCR
Instructions
Enter-Confirm Setup-Exit
Move …†
Dynamic Range
While watching DVD movies, you may wish to compress the dynamic
range of the audio output (the difference between the loudest and
quietest passages). This allows you to listen to a movie at a lower
volume without losing clarity of sound. Set ‘Dynamic Range‘ to Low or
High for this effect.
Follow the same procedure as ‘Digital Output‘ to set the ‘Dynamic
Range’.
Audio
Digital Output Off
Dynamic Range Off
Virtual Surround Off
Instructions
Enter-Confirm Setup-Exit Move …†
Select Dynamic
Range
Off
Low
High
DF-L71D1P-UA/TA 04.11.24 11:51 PM 페이지28

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Daewoo DF-4100P and is the answer not in the manual?

Daewoo DF-4100P Specifications

General IconGeneral
BrandDaewoo
ModelDF-4100P
CategoryDVD VCR Combo
LanguageEnglish

Related product manuals