Daewoo DF-4501P User Manual

PLAYBACK
2928
On-Screen Display Overview
On-Screen Display Overview
Initial Setup
• Some options cannot be reset, including Parental Controls, Password, and Country Code.
• After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set the
country, language, channel, and clock setting again.
If you wish, you can reset the DVD Recorder+VCR to its original factory
settings.
1 Press [SETUP].
2 Use [œ/√] to select ‘Restore Defaults ‘.
3 Press [ENTER].
4 The Initialize menu will appear. Use the […†œ √] buttons to select
‘RESET‘ and press [ENTER].
System Information
System Information helps service personnel identify key firmware
information about your DVD Recorder+VCR in case service is required.
Restore Defaults
System Info
Choose OK Exit
ENTER SETUP
œ √
…
†
Restore Defaults
Choose OK Exit
ENTER SETUP
œ √
…
†
Version WP3000000FQ-050813
Loader Version AA003 A100
Micom Software 1.0.6
DivX®
Registration code WWJR3845
to learn more visit www.divx.com/vod
• Default Reset
During disc playback, press [DISPLAY] to show information about the current
disc.
The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded
disc. To access the On-Screen Display (or OSD), press the [DISPLAY] button.
Displaying DVD Information
√√
Title : Shows the current title number and total number of titles, and skips to the desired title
number.
Chapter : Shows the current chapter number and total number of chapters, and skips to the
desired chapter number.
Time Elapsed : Shows the elapsed playing time, and skips to the desired time.
Audio : Shows the current audio soundtrack language, encoding method, and channel number,
and changes the setting; AC3 5.1 CH English or AC3 2 CH English
Subtitle : Shows the current subtitle language, and changes the setting
Repeat : Shows the current repeat mode, and changes the setting; Chapter, Title, All or Off
A-B Repeat : Shows the current A-B repeat mode, and changes the setting; A-, A-B or Off
Random Repeat : Shows the current random repeat mode, and changes the setting; On or Off
OSD Language : Shows the current OSD language, and changes the setting
1 Press [DISPLAY] during playback. The on-screen display appears on the TV screen.
2 Use [œ√] to select the desired icon on the on-screen display. Press [ENTER] to display a submenu.
3 Use […†] to change the numbers. Press [ENTER] to confirm.
• Displaying icons on DVD/CDDA disc
Changing menu options in display menu
02/17
001/002
0:00:26
Off
Off
Off
Off
1
Track : Shows the current track number and total number of tracks, and skips to the desired
track number.
Audio Effect : Shows the current audio effect, and changes the setting; Stereo or Mix-Mono
Sound Effect : Shows the current sound effect, and changes the setting; Off, Concert, Living
Room, Hall, Bathroom, Cave, Area or Church
01/16
Off

Daewoo DF-4501P Specifications

Operating Environment

operating temperature	5°C to 35°C
operating humidity	5% to 90%

Power

power requirements	200-240V, 50/60Hz
power consumption	Maximum 26W
stand-by power consumption	3.7W

Recording Specifications

video recording sampling frequency	27MHz
video recording compression format	MPEG 2
audio recording sampling frequency	48kHz
audio recording compression format	MPEG1 Layer2

VCR Specifications

tape speed SP	23.39 mm/sec
tape speed LP	11.70 mm/sec
tape width	12.7 mm

DVD Specifications

laser wavelength	650 nm
frequency response DVD	8 Hz to 22 kHz
frequency response CD	8 Hz to 20 kHz

Inputs

antenna input impedance	75 Ω
video input level	1.0 Vp-p 75 Ω
audio input level	-8.8 dBm more than 47 k

Outputs

video output level	1.0 Vp-p
component video output Y level	1.0 Vp-p
audio output digital level	0.5 Vp-p 75 Ω

Weight and Dimensions

dimensions	430 92 312 mm
mass	4.96 kg