2423
Daewoo Video Cassette Recorder User’s Guide Daewoo Video Cassette Recorder User’s Guide
8 Use 0-9 to enter the recording start time.
9 Use 0-9 to enter the recording end time.
AM/PM and the current date/year will be selected
automatically.
10 Use 0-9 to set the date that the program airs.
DAY(Sat)/Year(01) will be set automatically.
11 Press 1 or 2 to select the recording speed and press
MENU and the following screen will appear.
12 Press MENU three times repeatedly to return to
normal viewing and if you want to make a new
program, press MENU and restart from step 4 to 11.
Recording programs,
continued
✔
See page 19 for
information, about tape
speed. Understanding tape
speed options will ensure
that you are able to
completely record a
program without running
out of tape and that you
are able to record
programs with the level of
picture quality you desire.
✔
To turn the VCR off after
setting up a timer recording
program, press POWER on
the remote control or
POWER on the VCR. The
timer recording indicator
will light.
• To stop a timer recording
program in process,
press and hold STOP for
about five seconds.
• When the timer
recording indicator
appears, the VCR is in
standby and cannot be
operated. To release the
VCR from standby, press
POWER.
Timer recording
There are four timer modes: One time, Daily, Weekdays,
and Weekly
1 Be certain to do the steps in the section, “Preparing
to record a program,” as shown on previous page.
2 Make certain the clock is set to the correct time.
3 Press MENU to display the menu.
4 Press 1 to select Timer Recordings.
5 Press 1 to select Make a New Program.
6 Press 1 for One Time; 2 for Daily; 3 for Weekdays,
or 4 for Weekly.
7 Use 0-9 to enter the channel number to record.
While the VCR is in the CABLE mode, if a channel
over 100 is desired, press 100’s key and then the
next 2 digits in order.
Recording programs,
continued
✔
Timer recording allows
you to record up to eight
different programs within
one year period.Once you
have set the timer for timer
recording, the VCR will
turn on, record the
program you selected, and
then shut off automatically.
✔
If the VCR is in cable
box setup mode, the preset
channel number will be
displayed automatically.
To Next Page
Loading...
Need help?
System
Video
Audio
