6
Enter ENTER
z Confirm current operation
z Go to default button
z Go to menu
Assistant Fn
z One-window monitor mode, click this button to display
assistant function: PTZ control and image color.
z Backspace function: in numeral control or text control, press
it for 1.5 seconds to delete the previous character before
the cursor.
z In motion detection setup, working with Fn and direction
keys to realize setup.
z In text mode, click it to switch between numeral, English
character (small/capitalized) and etc.
z In HDD management interface, you can click it to switch
HDD record information and other information (Menu
prompt)
z Realize other special functions.
Record REC
Manually stop/start recording, working with direction keys
or numeral keys to select the recording channel.
Window switch Mult Click it to switch one-window/multiple-window.
Shuttle(outer
ring)
z In real-time monitor mode it works as left/right direction key.
z In playback mode, counter clockwise to forward and clock
wise to backward.
Jog(inner dial)
z Up/down direction key.
z Playback mode, turn the inner dial to realized frame by
frame playback. (Only applies to some special versions.)
USB port
To connect USB storage device, USB mouse, burner and etc.
Record light 1-16
For 4/8/16 channel device: indication light on means that the
channel is in recording.
Remote control
indication light
ACT Remote control indication light
Status indication
light
Status If there is Fn indication light, current status indication light is null.
Power indication
light
PWR Power indication light
IR Receiver IR It is to receive the signal from the remote control.
1.6 Rear Panel
1.6.1 32 Series
The rear panel is shown as below. See Figure 1-3.
To Next Page
Loading...
Need help?
General
