User’s Manual
7
Device initialization (2) Figure 3-3
Configure the parameters. Step 5
Table 3-1 Parameter description
The user name is admin by default.
The new password can be set from 8 characters to 32 characters
and contains at least two categories from upper cases, lower
cases, numbers and special characters (excluding “'”, “"”, “;”, “:”
and “&”)
Follow the password strength prompt to set a high security level
password.
The new password should be in accordance with the confirm
IT IS SELECTED BY DEFAULT, THE EMAIL WILL BE USED FOR password
retrieval and reset.
Click Initialize and the system begins to initialize device. Step 6
If initialization succeeded, will be displayed. If initialization failed, will be
displayed. Click the icon to check more details.
Click Complete, and then device initialization is finished. Step 7
After initialization is completed, the device status becomes Initialized on the main
interface, and the device information will be displayed on other interfaces.
To Next Page
Loading...
Need help?
General
