III
Important Safeguards and Warnings
This section introduces content covering the proper handling of the box, hazard prevention, and
prevention of property damage. Read carefully before using the box, and comply with the guidelines
when using it.
Installation Requirements
●
Improper use of the battery might result in a fire or explosion.
●
Make sure to use the same model when replacing the battery.
●
Use the standard power adapter. We will assume no responsibility for any problems caused by
the use of a nonstandard power adapter.
●
Use the power cords that are recommended for the region and conform to the rated power
specifications.
●
Do not place the box in a place exposed to sunlight or near heat sources.
●
Keep the box away from dampness, dust, and soot.
●
Install the box on a stable surface to prevent it from falling.
●
Put the box in a well-ventilated place, and do not block its ventilation.
●
The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Please note that the power supply requirements are subject to the device label.
●
The device is a class I electrical appliance. Make sure that the power supply of the device is
connected to a power socket with protective earthing.
●
The appliance coupler is a disconnection device. Keep it at a convenient angle when using it.
Operation Requirements
●
Do not drop or splash liquid onto the box, and make sure that there is no object filled with liquid
on the box to prevent liquid from flowing into it.
●
Operate the box within the rated range of power input and output.
●
Do not disassemble the box.
●
Use the box under allowed humidity and temperature conditions. Operating temperature: –10 °C
to +55 °C (14 °F to 113 °F).
To Next Page
Loading...
Need help?
General
