5
4 Basic Operations
The remote control supports limited operations: You can use the remote control to turn on or off the
screen, turn on, turn off, or restart the box, adjust the volume and go back to the home page. We
recommend you connect a mouse to operate the box. This chapter uses connecting a mouse for
device operations as the example.
4.1 Starting and Shutting Down
●
Before you start the box, check whether the input voltage matches the rated voltage of the box.
●
To ensure stable operation and long service life of the box and external devices connected to the
box, follow national standards and provide a power supply with stable voltage and low ripple
interference.
Starting the box
Plug in the power cord, and then turn on the switch. The box starts.
Shutting down the box
Turn off the switch and then unplug the power cord. The box shuts down.
4.2 Initialization
When you log in for the first time or after you restore the factory settings, you need to initialize the
box. After that, you can configure and operate the box.
Step 1 Power on the box.
Step 2 Select the language, and then click
Save and Next
.
Step 3 Read the software license agreement, and then click
Next
.
Step 4 Enter and confirm the password, and then click
OK
.
Step 5 Set your security questions.
Click
Skip
if you do not want to configure the security questions.
1. Select the security questions and then configure the corresponding answers.
2. Click
Save and Next
.
To Next Page
Loading...
Need help?
General
