Daikin ERQ User Manual

Field Setting ESIE09-05
92 Test Operation
3. Field Setting
3.1 Field Setting from Remote Controller
Individual function of AHU can be changed from the remote controller. At the time of installation
or after service inspection / repair, make the local setting in accordance with the following
description.
Wrong setting may cause malfunction.
3.1.1 Wired Remote Controller
BRC1D528
1. When in the normal mode, press the “ ” button for a minimum of four seconds, and the
FIELD SET MODE is entered.
2. Select the desired MODE NO. with the “ ” button.
3. Push the “ ” upper button and select FIRST CODE NO.
4. Push the “ ” lower button and select the SECOND CODE NO.
5. Push the “ ” button once and the present settings are SET.
6. Push the “ ” button to return to the NORMAL MODE.
Notes : 1. Do not make any settings not given in the table.
2. Not displayed if the AHU is not equipped with that function.
3. When returning to the normal mode, “88” may be displayed in the LCD in order for the
remote controller to initialize itself.
SETTING
UNIT No.
GR OUP
3
1
45 2
6
FIELD
SET
MODE
UNIT NO.
FIRST
CODE NO.
MODE NO.
SECOND
CODE NO.
Все каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html

Daikin ERQ Specifications

General

Brand	Daikin
Model	ERQ
Category	Heat Pump
Language	English