15
COMFORT AIRFLOW Operation
The fl ow of air will be in the upward direction while in COOL operation and in the
downward direction while in HEAT operation, which will provide a comfortable
wind that will not come in direct contact with people.
To start COMFORT AIRFLOW operation
Press .
“ • ” is displayed on the LCD.
Airfl ow rate is set to Auto.•
COOL/DRY: The fl aps will go up.
HEAT: The fl aps will go down.
To cancel COMFORT AIRFLOW operation
Press again.
The fl aps will return to the memory position from before COMFORT AIRFLOW •
operation.
“ •
” disappears from the LCD.
COOL operation HEAT operation
NOTE
Notes on COMFORT AIRFLOW operation
The fl aps position will change, preventing air from blowing directly on the occupants of the room.•
POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same time.•
Priority is given to the function of whichever button is pressed last.
The airfl ow rate will be set to Auto. If the upper and lower airfl ow direction is selected, the COMFORT AIRFLOW operation will be canceled.•
01_EN_3P255639-2A.indd 1501_EN_3P255639-2A.indd 15 2/16/2011 2:43:23 PM2/16/2011 2:43:23 PM
To Next Page
Loading...
Need help?
General
