SiBE18-821_C RA Indoor Unit
Operation Manual 171
7
Name of Parts
Remote Controller
Signal transmitter
Receiver
FAN setting button
• It selects the airflow rate setting.
Page 14
POWERFUL button
• POWERFUL operation.
Page 18
Display (LCD)
• It changes the temperature setting.
Page 12
ON/OFF button
Page 11
Front cover
. • Open the front cover
Page 8
Model ARC466A1
• To use the remote controller, aim the
transmitter at the indoor unit. If there
is anything to block signals between
the unit and the remote controller,
such as a curtain, the unit will not
operate.
• Do not drop the remote controller.
Do not get it wet.
• The maximum distance for
communication is approx. 6m.
Make sure that there are no
obstacles within 50cm under the
signal receiver.
Such obstacles, if any, may have an
adverse influence on the reception
performance of the receiver and the
reception distance may be
shortened.
50cm or
more
• Press this button once to start
operation.
Press once again to stop it.
TEMPERATURE
adjustment buttons
• It displays the current settings.
(In this illustration, each section is
shown with its displays on for the
purpose of explanation.)
To Next Page
Loading...
Need help?
General
