Danfoss air User Manual

Instructions Valve installation
Fix the bayonet socket that will hold the valve to
the ceiling. If it is a gypsum ceiling, we recom-
mend putting a wooden plate on the back for
the screws to bite into. If the duct needs to pass
through insulation, we recommend measuring
the insulation section and installing a duct sec-
tion along a suitable length of the bayonet socket
(VGU or VGM). Use an NPU connection nipple to
connect the VGM and the duct section.
200
200
200
200
200
200
5.3 Installing the valves
17
VIEWA402

Danfoss air Specifications

General

Brand	Danfoss
Model	air
Category	Air Conditioner
Language	English