Danfoss APP 0.6 User Manual

Instruction Trouble shooting guide for APP and APP S 674 pumps
10
06.2013
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice.
This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss A/S
High Pressure Pumps
DK-6430 Nordborg
Denmark
Picture 1
If the port plate has scratches, level dierences or both between the arrows,
the port plate must be replaced.
Even small scratches or wear will cause loss of ow.
To check: See item 6.1, picture 3
6.2 Port plate
6.3 Swash plate
Picture 1 If the swash plate is polished 360°, it is an indication of insucient ltration.
The surface of the swash plate must be plane and even at same level all
over. To check this, please see item 6.1, picture 3.
If the surface has any marks/scratches, it is worn/damaged and a new one
is required.
Please contact Danfoss High Pressure Pumps sales oce for further infor-
mation.
Scratches
Level dierences between
dull and shining PEEK
7. Right and wrong
(180R9042)
MAKING MODERN LIVING POSSIBLE
danfoss.high-pressurepumps.com
180R9042
Right and wrong
Trouble shooting guide for water hydraulic systems

Danfoss APP 0.6 Specifications

General

Brand	Danfoss
Model	APP 0.6
Category	Water Pump
Language	English