Introduction
EY.65.H4.02
1
1. INTRODUCTION
1.1 What Is In This Guide?
This Guide is for the ECL 2000 district heating temperature controller. The purpose
of the Guide is to describe the functionality of the ECL 2000 and to enable users to
operate the controller from the front panel.
Chapter 2-7 provide information regarding the day-to-day usage of the controller.
Chapter 8-10 provide information intended for project and service engineers, for
example about configuring the ECL 2000 and using service menus to modify the setup
of the controller. Appendix A contains a number of charts providing an overview of
the ECL 2000’s display pictures. Appendix B provides a similar listing of the ECL
2000’s service menus. Appendix C provides a list of the data displayed in the ECL
2000’s Log pictures. At the end of the Guide, you find a glossary, a list of references
and an index.
1.2 Getting Started With the ECL 2000
Instructions for installing the ECL 2000 are provided in the ECL 2000 Installation
Guide (ref. [2]). After the controller has been installed, it must be configured. This
step consists of selecting an application (i.e. a system type) and, if the selected
application allows this, configuring inputs and outputs. Instructions for this start on
page 25 of this Guide.
To Next Page
Loading...
Need help?
General
