The electric machine is not a complete machine as such, but it must be integrated to the other system. This requires more
work and planning than normal electric machine
does.
The
electric machines
have
been developed especially for heavy duty, marine and transportation
applications. They are
more reliable, smaller, lighter and more
efficient
than conventional products
on the market.
Typical applications of
the electric machines are:
Motor (electric propulsion) and generator for hybrid marine vessels or mobile work machine
and bus parallel hybrid applications.
Traction motor and generator for electrical or hybrid electrical mobile work machines or buses.
The electric machines feature Syncronous Reluctance assisted Permanent Magnet (SRPM) motor
technology, having several advanced features:
Extremely compact and robust structure.
High efficiency throughout the operation range.
Liquid cooling with water/glycol mixture.
Low coolant ow required.
High allowed coolant temperature.
Possibility for IP65 enclosure class to maximize reliability.
Multiple mounting possibilities.
Extended speed and torque capabilities compared to standard PM machines.
Machine structure designed to be able to produce high starting torques (instant torque to
non-moving wheel).
Optimized speed range to meet most common gear ratios used in heavy mobile machinery.
The integrated electric machines have several frame models (sizes) to be the optimal solutions for
several applications. These are iXS and
iXSe frames. The electric machines also have
options
for
temperature sensors.
Intended use of the electric machine
This electric machine
is
intended to be used as a motor or generator and as a part of a machinery,
for example
in:
Power train of a marine vessel, transportation vehicle or a heavy duty work machine.
Power generation equipment.
In a power generation equipment the
electric machines are intended to be powered by a prime
mover, for example,
an internal combustion engine and controlled by the above mentioned
electric power inverter.
The electric
machine
is
solely intended for professional use, and may be operated only by trained
professionals. The maintenance of the electric machine may be done
only by trained professionals.
Not-allowed use of the
electric machine
It is forbidden to use, handle and maintain the machine in following ways (including but not
limited to):
To Next Page
Loading...
Need help?
General
