17
User Instructions
Your programmer
The FP715 Si allows you to switch your heating and hot water
on and off at times that suit you.
Your programmer has had the date and time set up during
manufacture and will automatically change between Greenwich
Mean Time and British Summer Time.
You can programme up to 3 ON/OFF times per day for the
heating and the hot water and the two systems can be operated
independently.
Preset Programmes
Your FP715 Si comes ready programmed with a set of operating
times which often suit most people.
If you want to change any of these settings, you can do so by
following the instructions on pages 20-26. First, follow the steps
on page 18-19 to set the correct time and date.
Overview & Preset Programmes
Event No.
Hot Water &
Heating
Mon-Fri Sat-Sun**
1 1st ON 6:30 7:30
2 1st OFF 8:30 10:00
3* 2nd ON* 12:00* 12:00*
4* 2nd OFF* 12:00* 12:00*
5 3rd ON 17:00 17:00
6 3rd OFF 22:30 22:30
* Not applicable if unit set to 2 ON/OFF’s per day by installer
**Not applicable if unit set to 24 hour mode by installer
See page 20 for explanations of diff erent settings
To Next Page
Loading...
Need help?
General
