18
Before you start
Open the fl ap on the front of the clock. Press the RESET button
using a non-metallic object (e.g. pencil/matchstick) until you
hear a click and the 2 red lights on the front of the unit fl ash
once.
This will stop and restart the
electronics, without losing the
factory set time and date settings.
To fully reset the unit see page 32.
Choice of 24hr or AM/PM display
Press and hold DAY/HOL & NEXT
ON/OFF for 1.5 seconds to toggle
between 24hr clock and AM/PM
display, as required.
Setting the Date and Time
These settings are made during
manufacture and only need to be
made in the unlikely event that the
unit has lost the settings.
Setting the Date
Press and hold PROG for 5 seconds
to display year.
Use the + or - buttons to set the
correct year.
DAY/HOL
DAY/HOL
DAY/HOL
DAY/HOL
RESET, 24hr or AM/PM display, Setting Date and Time
To Next Page
Loading...
Need help?
General
