Danfoss Heating
15
GB
Press and hold the PROG button for 5 seconds until the display
returns to previous RUN mode (Fig. 21).
Press the PROG button, the display will change to show the default
days assigned to “A” days (MON, TUE, WED, THU, FRI) (Fig. 22).
Use the + or - buttons to scroll forwards or backwards through the
days of the week.
To deselect a day press the V button, (for example TUE). To select a
day press the Λ button (for example SUN).
Any deselected days are automatically assigned to “B” days.
Programming “A” days and events
a) Press the PROG button, the rst preset time. (Event 1 for
Programme A) appears in display (Fig. 23).
b) Use the + or - buttons to adjust the TIME (press and hold to
change in 10 minute increments).
Fig. 21 Fig. 22
Fig. 23
To Next Page
Loading...
Need help?
General
