To Next Page

To Previous Page

FP735SI

c) Press the NEXT button to move to the next preset time (Event 2)

(Fig. 24).

d) Repeat steps b, c, and d to programme the remaining events.

Programming “B” days and events

a) Press the DAY button until the  rst preset time (Event 1 for

Programme B) appears in display (Fig. 25).

b) Use the + or - buttons to adjust the TIME (press and hold to

change in 10 minute increments).

c) Press the PROG button to move to the next preset time (Event 2)

(Fig. 26).

d) Repeat steps b, c, and d to programme the remaining events.

Running the programme

Press the PROG button to return to previous RUN mode. The

heating will now follow the times programmed (Fig. 27).

Fig. 24

Fig. 25 Fig. 26 Fig. 27

Note: Advanced copy function is only available in 7 day mode.

Danfoss FP735Si User Manual

Other manuals for Danfoss FP735Si