Danfoss Icon2 User Manual

70 | © Copyright Danfoss Climate Solutions | 2023.01
AB432956914381en-010101
Service Manual Danfoss Icon2™
Application 17
Continued
Installer App settings
Function Factory setting
Off On
PWM+ proportional control of actuator outputs
฀
Heat pump optimizer – maintenance of minimum flow
฀
Required accessories
1 2-way control valve RA-C DN20 013G3096
Compression ferrule set 22mm x 1" for RA-C 20 013U0135 (x4)
2 Stainless steel floor heating manifold SSM-F, 2–12 groups
088U0752 to
088U0762
Set of 2 mounting brackets 088U0585
Set of 2 ball valves 1" 088U0822
3 Thermal actuator TWA-A 230V NC suitable for SSM-F manifold 088H3112
4 Dew point sensor CF-DS 088U0251
5a/b Thermal actuator TWA-A 230V NC suitable for RA-C DN20 088H3112 (x2)
6 Wall switch for manual changeover to cooling External supplier

Danfoss Icon2 Specifications

General

Brand	Danfoss
Model	Icon2
Category	Controller
Language	English