Danfoss PAH Series User Manual

Parts list | PAH 2/4/6.3/10 and 12.5
56
180R9379 | AQ188686503004en-000801 | PAH 2-12.5 } 07.2022
180B4105 - Seal set (PAH 10 -12.5)
180B4107 - Cylinder barrel set (PAHT 10 -12.5) 180B4113 - Cylinder barrel set (PAH 10 -12.5)
180B4108 - Valve plate set (PAH 10 -12.5)
180B4106 - Piston set (PAHT 10 -12.5) 180B4114 - Piston set (PAH 10 -12.5)
180B4305 - Swash plate set (PAH 10) 180B4306 - Swash plate set (PAH 12.5) 180Z0235 - Tool set
Pos. Qty. Designation Material
- 1 Shaft bush, torpedo - X
- 1 Press bush - X
1 1 Housing AISI 304 / PEEK
2 1 Pin AISI 316 X
5 4 Screw AISI 304 X
31 1 Swash plate AISI 431 X X
32 1 Screw AISI 304 X X
33 1 Washer AISI 304 X X
34 1 Pin AISI 316 X X
61 1 Cylinder barrel AISI 431 / PEEK X X
62 1 Spring AISI 316Ti X X
63 1 Spring guide PEEK X X
64 1 Retainer ball PEEK X X
65 1 Retainer plate AISI 304 X X
66 5 Piston AISI 431/ PEEK X X
67 1 Key AISI 316Ti X
91 1 Port plate AISI 304 / PEEK X
92 1 Valve plate AISI 431 X
93 5 Back up ring PTFE X X
94 5 O-ring NBR X X
121 1 Port ange AISI 304 / PEEK
122 1 O-ring NBR X
123 1 O-ring NBR X
124 1 Shaft seal AISI 304 / NBR X
125 1 End cover AISI 304
126 1 Pin AISI 316
127 2 Screw AISI 304 X
130 2 O-ring NBR X
135 1 Pin AISI 316 X
136 2 O-ring NBR X
- 1 Service instruction (180R9095) - X X X X X X X X
4. Spare parts list for
PAH 10-12.5

Danfoss PAH Series Specifications

General

Brand	Danfoss
Model	PAH Series
Category	Water Pump
Language	English