Danfoss TS715 Si User Manual

14
Setting the correct Time and Day
Before you start
This will reinstate the preset
programmes and sets correct day
and time.
To fully reset the unit see page 27.
Press and hold DAY/HOL & NEXT ON/
OFF for 2 seconds to toggle between
24hr clock and AM/PM display, as
required.
These settings are made during
manufacture and only need to be
made in the unlikely event that the
unit has lost the settings.
Setting the Date
Press and hold PROG for 5 seconds to
display year.
Use the + or - buttons to set the
correct year.
DAY/HOL
Choice of 24hr or AM/PM display
RESET, 24hr or AM/PM display, Setting Time
Open the  ap on the front of the clock. Press the RESET button
using a non-metallic object (e.g. pencil/matchstick) until you
hear a click and the red light on the front of the unit comes on
and the LCD goes blank.
DAY/HOL
DAY/HOL

Danfoss TS715 Si Specifications

General

Brand	Danfoss
Model	TS715 Si
Category	Timer
Language	English