Danfoss VLT 2050 User Manual

MG.20.B6.02 – VLT is a registered Danfoss trademark
VLT
®
2000 Series
46
The display
Light in the display indicates that the frequency
converter is connected to the supply voltage.
The display has three lines:
Line A.Text written with capital letters is shown
permanently - also while you are
programming the frequency converter.
Line B.States parameters and the rotation direction
of the motor.
Line C.Indicates the parameter value and what
menu you are in.
The push buttons
There are eight keys on the frequency converter’s
control panel.
The different keys and their functions are described
overleaf.
Operating your VLT
You program and control the frequency converter via
the control panel. The control panel consists of:
− a display allowing you to interface with the
frequency converter.
− push buttons which can have one or several
functions (they are described later in this chapter).
− two light emitting diodes (LEDs):
Green light shows that power is on.
Red light indicates alarm.
How to operate your VLT
Stop
Reset
Menu Data
–
+
Jog
Fwd.
Rev.
➤
➤
Start
■
■
■

Danfoss VLT 2050 Specifications

General

Brand	Danfoss
Model	VLT 2050
Category	Inverter
Language	English