Danfoss VLT 2050 User Manual

MG.20.B6.02 – VLT is a registered Danfoss trademark
VLT
®
2000 Series
80
514 Bus bit 4 (BUS BIT 4)
Value:
✭ Q stop (Q-STOP) [0]
DC-brake (DC BRAKE) [1]
Description:
See parameters 404, 306, 307 and 308.
516 Bus reference (BUS REFERENCE)
Value:
−100.00% - +100.00% ✭ 0
Description:
If you choose Local reference in parameter 003 after
choosing a bus reference, the bus reference will be
transferred to local reference.
517 Store data values (STORE DATA)
Value
✭ Off (OFF) [0]
On (ON) [1]
Description:
Setting parameter 517 to On stores the downloaded
values. Data values will be stored after you have
pressed the “Menu” key.
While the unit is storing data, the display will show
(SAVE DATA) and flash in line C.
■
Description of parameters
606 Total operation hours (TOTAL OP HRS.)
Description:
See parameter 610
607 Running hours (RUNNING HRS.)
Description:
See parameter 610
608 Number of power-ups (NO. POWERUPS)
Description:
See parameter 610
609 Number of over-temperature (NO. OVERTEMPS)
Description:
See parameter 610
610 Number of over-voltage (NO. OVERVOLTS)
Description:
Information stored by the VLT frequency converter for
later analysis.
Parameter 606-607 are only updated every hour.
✭ = Factory setting. Text in ( ) = Display text. The figures in [ ] are used in bus communication.
■
■
■
■
■
■
■

Danfoss VLT 2050 Specifications

General

Brand	Danfoss
Model	VLT 2050
Category	Inverter
Language	English