Danfoss VLT AutomationDrive FC 302 Installation Manual

Contents
1 Introduction
5
1.1 Purpose of the Manual
5
1.2 Additional Resources
5
1.3 Product Overview
5
1.3.1 Intended Use 5
1.3.2 Working Principle 6
1.3.3 Exploded View Drawings 7
1.4 Enclosure Sizes and Power Ratings
15
1.5 Approvals
15
1.5.1 Approvals 15
1.5.2 Compliance with ADN 15
1.6 Harmonics Overview
15
1.6.1 Harmonics 15
1.6.2 Harmonic Analysis 15
1.6.3 Eect of Harmonics in a Power Distribution System 16
1.6.4 IEC Harmonic Standards 17
1.6.5 IEEE Harmonic Standards 18
2 Safety
20
2.1 Safety
20
2.2 Qualied Personnel
20
2.3 Safety Precautions
20
3 Installation
21
3.1 Installation Site Checklist
21
3.2 Electrical Installation
21
3.2.1 Items Supplied 21
3.3 Mechanical Installation
22
3.3.1 Cooling and Airow 22
3.3.2 Lifting 24
3.3.3 Cable Entry and Anchoring 25
3.3.4 Terminal Locations - Frame Size D13 29
3.3.5 Terminal Locations - Frame Size E9 30
3.3.6 Terminal Locations for Enclsoure Size F18 31
3.3.7 Torque 34
4 Electrical Installation
35
4.1 Safety Instructions
35
Contents Installation Manual
MG37A322 Danfoss A/S © Rev. 04/2015 All rights reserved.

Danfoss VLT AutomationDrive FC 302 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 302
Category	DC Drives
Language	English