Danfoss VLT FC Series User Manual

6 Electronically Controlled Bypass (ECB) Operation
6.1.1 Overview
Information provided in this section is intended to enable
the user to connect control wiring, program functions, and
operate the ECB and its optional features.
The ECB contains a local processor located on the ECB
control card which interacts with the drive’s control logic
for programmable options, remote command input, and
output status reporting. Rather than panel-mounted
operator-activated selector switches, as on the electrome-
chanical option panel, ECB control is provided by the
drive’s processor.
The ECB also contains a power supply which provides back
up for the drive’s logic circuitry, so even if the drive loses
power, the control and communication functions are
maintained.
1
2
3
4
130BX230.11
Illustration 6.1 Local Control Panel (LCP)
1
LCP display
2 Menu keys
3 Menu navigation
4 Control keys
Table 6.1 Legend to Illustration 6.1
Programming and display are provided by the drive’s local
control panel (LCP). See Illustration 6.1. An important
feature of the ECB is the ability to accept commands from
a building automation system (BAS) and to report
operational status in return.
Control wiring connections are made to either the drive’s
control terminals (see Illustration 6.2) or terminals provided
on the ECB control card (see Illustration 6.2). Drive analog
and digital I/O terminals are multifunctional and need to
be programmed for their intended use while the terminals
on the ECB control card are dedicated for specific
functions.
Programming options for drive terminals are seen by
pressing [Main Menu] or [Quick Menu] on the LCP.
Parameter menus appear in the LCP display. The arrow
keys are used for navigating through the parameter lists.
Electronically Controlled B... Option Panel Operating Instructions
42 MG14I102 - VLT
®
is a registered Danfoss trademark
6
6

Danfoss VLT FC Series Specifications

General

Brand	Danfoss
Model	VLT FC Series
Category	DC Drives
Language	English