VLT
®
FCD Series
■ Accessories for FCD 300
Type Description Ordering no.
LCP2 control unit LCP2 for programming the frequency converter 175N0131
Cable for LCP2 control unit Cable from LCP2 to frequency converter 175N0162
LCP2 remote-mounting kit Kit for remote-mounting of LCP2 (incl. 3 m cable,
excl. LCP2)
175N0160
LOP2 (Local Operation Pad) LOP can be used for setting the reference
and start/stop via the control terminals.
175N0128
VLT Software Dialog CD-ROM version* 175Z0953
Motor adaption plate Plate for adapting to non Danfoss Bauer motors. 175N2115
Membrane Membrane for preventing condensation. 175N2116
Internal brake resistor Brake resistor for mounting inside the terminal box. 175N2117
Plug kit for LCP2 Plug for LCP2 for mounting in the terminal box. 175N2118
Motor star terminal Terminal for interconnection of motor wires (star point). 175N2119
* Incl. the modules Basis, Logging, Template,
Guided Tour in 6 languages (Danish, English, Ger-
man, Italian, Spanish and French).
MG.04.A1.02 - VLT is a registered Danfoss trade mark
16
To Next Page
Loading...
Need help?
General