Danfoss VLT FCM Series User Manual

VLT
®
FCM Series
FREQUENCY
001 LANGUAGE
ENGLISH
50.0 Hz
The 3rd line of the display shows the parameter
number and name, while the status/value of the
selected parameter is shown in line 4.
■ Changing data
Regardless of whether a parameter has been selected
under the Quick menu or the Menu mode, the procedure
for changing data is the same. Pressing the [CHANGE
DATA] key gives access to changing the selected
parameter, following which the underlining in line 4
will flash on the display. The procedure for changing
data depends on whether the selected parameter
represents a numerical data value or a text value.
■ Changing a text value
If the selected parameter is a text value, the text value
is changed by means of the [+/-] keys.
50.0 Hz
FREQUENCY
001 LANGUAGE
ENGLISH
The bottom display line shows the text value that will be
entered (saved) when acknowledgement is given [OK].
■ Infinitely variable change of numeric data value
If the chosen parameter represents a numeric data
value, a digit is first selected by means of the [<>] keys.
50.0 Hz
SETUP
1
FREQUENCY
130 START FREQUENCY
09.0 HZ
Then the chosen digit is changed infinitely variably
by means of the [+/-] keys:
50.0 Hz
SETUP
1
FREQUENCY
130 START FREQUENCY
10.0 HZ
The chosen digit is indicated by the digit flashing. The
bottom display line shows the data value that will be
entered (saved) when signing off with [OK].
MG.03.H3.02 - VLT is a registered Danfoss trademark
28

Danfoss VLT FCM Series Specifications

General

Brand	Danfoss
Model	VLT FCM Series
Category	DC Drives
Language	English