Danfoss VLT HVAC Series User Manual

3 Parameter Description
3.1 Parameter Selection
Parameters for the adjustable frequency drive are grouped into various parameter groups for easy selection of the correct parameters for optimized
operation of the adjustable frequency drive.
The vast majority of VLT HVAC Drive applications can be programmed using the Quick Menu button and selecting the parameters under Quick Set-up
and Function Set-ups.
Descriptions and default settings of parameters may be found under the section Parameter Lists at the back of this manual.
0-xx Operation/Display 10-xx CAN Serial Communication Bus
1-xx Load/Motor 11-xx LonWorks
2-xx Brakes 13-xx Smart Logic Controller
3-xx Reference/Ramps 14-xx Special Functions
4-xx Limits/ Warnings 15-xx Adjustable Frequency Drive Information
5-xx Digital In/Out 16-xx Data Readouts
6-xx Analog In/Out 18-xx Info & Readouts
8-xx Comm. and Options 20-xx Adjustable Frequency Drive Closed-loop
9-xx Profibus 21-xx Ext. Closed-loop
22-xx Application Functions
23-xx Time Based Functions
24-xx Application Functions 2
25-xx Cascade Controller
26-xx Analog I/O Option MCB 109
3.2 Main Menu - Operation and Display - Group 0
3.2.1 0-** Operation / Display
Parameters related to the fundamental functions of the adjustable frequency drive, function of the LCP buttons and configuration of the LCP display.
3.2.2 0-0* Basic Settings
Parameter group for basic adjustable frequency drive settings.
VLT
®
HVAC Drive Programming Guide 3 Parameter Description
MG.11.C6.22 - VLT
®
is a registered Danfoss trademark 3-1
3

Danfoss VLT HVAC Series Specifications

General

Brand	Danfoss
Model	VLT HVAC Series
Category	DC Drives
Language	English