Name: Danfoss VLT MCA 121 EtherNet/IP
Brand: Danfoss
Rating: 4 (1 reviews)

To Next Page

To Previous Page

[1] Protection Value Port 2 (*Off – 20%)

12-95 Broadcast Storm Filter

Option: Function:

Applies to par. 12-94; if the Broadcast Storm Protection should also include Multicast telegrams.

[0] Broadcast only

[1] Broadcast & Multicast

12-98 Interface Counters

Option: Function:

Read only. Advanced Interface counters, from build-in switch, can be used for low-level trouble-

shooting, The parameter shows a sum of port 1 + port 2.

[0] In Octets

[1] In Unicast Packets

[2] In Non-Unicast Packets

[3] In Discards

[4] In Errors

[5] In Unknown Protocols

[6] Out Octets

[7] Out Unicast Packets

[8] Out Non-Unicast Packets

[9] Out Discards

[10] Out Errors

12-99 Media Counters

Option: Function:

Read only. Advanced Interface counters, from build-in switch, can be used for low-level trouble-

shooting, The parameter shows a sum of port 1 + port 2.

[0] Alignment Errors

[1] FCS Errors

[2] Single Collisions

[3] Multiple Collisions

[4] SQE Test Errors

[5] Deferred Errors

[6] Late Collisions

[7] Excessive Collisions

[8] MAC Transmit Errors

[9] Carrier Sense Errors

[10] Frame Too Long

[11] MAC Receive Errors

MCA 121 EtherNet/IP 6 Parameters

MG.90.J2.02 - VLT

is a registered Danfoss trademark

Danfoss VLT MCA 121 EtherNet/IP User Manual

Questions and Answers: