31
INSTALLATION & SERVICE MANUAL FOR PROFESSIONALS
Installation: Location Considerations
en
Installation
Location Considerations
Use of an appliance outside the specied conditions and contrary to its intended use will re-
sult in loss of all warranty claims. The warranty is limited to devices installed solely by trained
and certied personnel.
The following should be considered when selecting the appropriate location for installation:
• Conrm whether installation mode A (default) or B (optional) is possible at the installation
site. If mode B is preferred, follow the replacement procedure on page 29.
Note: The function for switching between modes A and B allows the duct pair (outside or
inside) to be directed towards the unit from the left OR right according to the construc-
tion of the building and room. See the dierence between the two modes in the “General
description” on page 17f.
• RCV 320 basic units are designed to be installed in environments with temperatures
>+12°C. The compact design allows the RCV unit to be placed in e.g. heated utility rooms
with only a little space
• Provide additional space to ensure proper installation and service access (see “Positioning
the device” on page 31).
• Ensure that the wall structure is sucient to support the weight of the unit regardless of
the wall bracket type.
Minimum space always required for service access (top view):
Min.
5 mm
Min.
5 mm
Fig. 11
Warranty claims
Location
requirements
Positioning the
device
To Next Page
Loading...
Need help?
General
