92 Supplies and Parts
Laminator Supplies
The laminator applies topcoat or patch overlay material to the front and back of the card. Topcoat
is a continuous film and patch is a die-cut polyester shape designed to fit standard ISO ID-1 size
card stock.
Topcoat and Patch Overlays
A patch overlay can cover the complete card, can have a opening for a smart card chip, or can
cover the card under the magnetic stripe.
Both topcoat and patch overlays can be clear or can have a transparent holographic image on
them. The holographic materials are called holographic topcoat or holographic patch and also
can be ordered with a custom image. In addition, holographic topcoat or patch can be designed
with a registered image that is located in the same position on each card.
Complete Card Smart Card
Magnetic Stripe
Clear Topcoat
Clear Patch
Random Holographic Patch
Random Holographic Topcoat
Registered Holographic Topcoat
Registered Holographic Patch
To Next Page
Loading...
Need help?
General
