DataCard SD460 Installation And Administration Guide

10 Installation
Install the 200-Card Input Hopper
Thestandardinputhoppercanholdabout1000.030in.(0.7 62mm)car ds.The
printerscanbeupgradedtousea200‐cardinputhopper.
The200‐cardinputhopperkitincludesthelargerhopperwithanattachedcover.
Thestandardhopperiseasilyremovedandthe200‐cardhoppercanbeinstalled
withoutusingtools.Youalsocanrefertotheinstructionsshippedwiththe
200‐cardinputhopperkit.
1. Opentheinputhopper.
2. Pressthereleasetab
locatedonthebackwall
ofthehopperwhi le
liftingthehopperupand
offtheprinter.
3. Installthe200‐cardinput
hopperbyaligningthe
tabswiththeslotsonthe
printer.
4. Pushthehopperdown
untilitclicksintoplace.
5. Loadupto200cardsin
thehopperandclosethe
hoppercover.The
printerisreadytoprint
cards.
Hopper Release Tab

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm