Datalogic DS2 Ethernet User Manual

Instruction Manual DS2 Ethernet
39
8. DIAGNOSTIC FUNCTIONS AND LED INTERFACE ERROR SIGNALLING
8.1. Device status visualization
The operator can verify the device functioning status using the four LEDs present the receiver unit and
the two present on the emitter unit.
The meaning of the LEDs present of the receiver unit (RX) depends on the light grid operating mode.
RECEIVING UNIT (RX)
Signalling
Status
- No power supply
- Normal RX functioning
- Presence of object inside sensitive area or units misaligned
- Short-circuit signalling on switching output
- Active ethernet connection
- Active ethernet connection
- active configuration mode
- no data frame sent (only in “Send on dig/ana output change” and
“Send on request”)
- Critical alignment of the TX and RX units or weak received signal
Simbolo
Descrizione
Led off
Led on
Blinking led

Datalogic DS2 Ethernet Specifications

General

Brand	Datalogic
Model	DS2 Ethernet
Category	Accessories
Language	English