PPI/DGL SETUP Submenu
15
Row Offset
Shifts the vertical start of the print position. This is the user setting for row
adjustment.
• 0 (0 to 99.99 Inch or 999.9 mm)
The default is 0.
NOTE: The Label Formatting command [R] only temporarily overrides this
setting; it reverts back to this setting after the current label format is
finished.
Column Offset
Shifts the horizontal, left-justified start of the print position to the right without
shifting the Label Width termination point to the right. This is the user setting
for row adjustment.
• 0 (0 to 99.99 Inch or 999.9 mm)
The default is 0.
NOTE: The Label Formatting command [C] only temporarily overrides this
setting; it reverts back to this setting after the current label format is
finished.
Format Attrib.
Affects the manner in which overlapping text and graphics are treated as the
label is printed.
• XOR. Intersecting text strings, images, and barcodes print on top of one
another.
• Transparent. Intersecting text strings, images, and bar codes will not be
printed. (An odd number of overlapping objects will print.)
• Opaque. Intersecting text strings, images, and barcodes are obliterated
by those formatted last. Each character cell is treated as opaque.
The default is XOR.
Error Handling
This setting defines how the emulation handles errors detected in the data
stream. For all selections, data processing will not be aborted when errors are
detected: labels will be printed as good as possible. Commands containing
errors will be ignored.
• Off. No signal to the user when errors are detected.
• Report. The printer will beep when one or more errors are detected, and
the first command that contains an error is shown on the printer’s LCD in
mnemonic form.
• Beep. The printer will beep once if one or more errors are detected.
The default is Off.
To Next Page
Loading...
Need help?
General